Want to sell your Arduino project?

Have you built a home automation system or a wearable device using Arduino, and wanted to sell 10, 20 or a 100 units to your friends?

When building a product after a prototype, you have to go through PCB design, pass through production, testing and certification.

If you buy ready modules, they are expensive, and their size might not be as small as you desire.

Also, you want to build a smartphone app for your product, but you are not an Android or an iOS developer.

We are working on a new maker product that allows you to create your projects as easy as coding an Arduino board, customize your own app and sell it to your close network.

The product is designed to

  • Have a smartphone app builder to create your own iOS and Android app.
  • Have a Bluetooth version and a Wifi version.
  • Be FCC & CE certified.
  • Be programmed using Arduino IDE.
  • Be low cost for you to make profit when you sell it.

If you want to sell your Arduino projects in small quantities, and don’t want to go through the hassle of production and testing, fill in the survey below to get a free board when it’s out, and get 10% off on all items in 1Sheeld store.

Update (Jan 31 2017): All free boards were allocated to makers, we cannot provide any more free dev. boards. Fill in the form below to be the first to know when we launch the product.




Related Blogs

1Sheeld Music Player Vs. SparkFun MP3 Player Shield

Today I will make a detailed comparison between our Music Player Shield in 1Sheeld, and SparkFun Mp3 Player Shield. I will cover the getting started points for each one, till you can play and pause music using both of them, and I’ve summarized the points of comparison between both shields in the table below: P.O.C  …

Display traffic status on an IKEA clock with Arduino and 1Sheeld

Whenever it’s time to get off the office, I always check the traffic status to choose the best time to go home. But I couldn’t find a way to do that autonomously. So then …. I was up to make a system that shows me the current traffic status with the help of a simple tool that is used …

10 Kickstarter Projects for Makers that you need to back right now!

Kickstarter has always been supporting makers to bring their ideas to life, and full of rich maker-targeting projects. I have combined a list of 10 13 Kickstarter projects that are live right now, and totally worth backing!  Eslov by Arduino That’s right, Arduino itself is announced Eslov on Kickstarter, a modular IOT kit that lets you …

codebenderesp-on-kickstarter

Codebender:ESP hits Kickstarter: 5 reasons to back it now!

Codebender has just launched a Kickstarter campaign for codebender:esp, a newly IDE that supports ESP boards. What is Codebender?  If you don’t know about Codebender, it is a cloud based IDE for Arduino, where you code your Arduino boards without the need to download an IDE, so you can share and embed your code online like …

respeaker-kickstarter

Respeaker on Kickstarter: Early birds still available, only 6 hours to go!

Voice control seems to be the next big thing, we have voice controlled alarms, voice controlled lights, and even voice controlled televisions. Now imagine being able to do this to all your devices, to command your devices and have them reply back to you. That’s what Respeaker promises, according to their Kickstarter campaign that has met almost 500% of their …

Troubleshooting 1Sheeld: 5 Common issues you may face

Hurray ..! Now you have your 1Sheeld, and it’s your first time to use it, but you faced some problems! From people who have been using 1Sheeld for the past years, we came up with these 5 common issues that they most confronted. If you have not done that already, please make sure to check the getting …